VPI Prime vta tower hight w/Kiseki Purple Heart

VPI Prime vta tower hight w/Kiseki Purple Heart

Postby JustinM » Sat Nov 09, 2019 8:20 pm

Hello,
I was wondering if anyone has had to lower the male bearing/pivot spike when using Kiseki Purple Heart cartridge or another cartridge. When I was trying to get the top of the head shell and bottom of cartridge parallel to the platter it still looks like it has a small rake to it. It sounds very good, but wondering if getting the vta a little lower would make any further improvements?
Thanks
JustinM
Jr. Member
 
Posts: 20
Joined: Tue Apr 17, 2018 11:46 pm

Re: VPI Prime vta tower hight w/Kiseki Purple Heart

Postby vienna acoustics » Sun Nov 10, 2019 12:42 am

:!:
Last edited by vienna acoustics on Thu Nov 28, 2019 1:37 am, edited 1 time in total.
!
vienna acoustics
Senior Member
 
Posts: 454
Joined: Mon Apr 09, 2018 10:07 pm

Re: VPI Prime vta tower hight w/Kiseki Purple Heart

Postby JustinM » Sun Nov 10, 2019 1:03 pm

Sorry about that I should have been more specific. It’s a VPI Prime running on bare plater, no mat with deluxe delrin and stainless steel screw down clamp. I had the Kiseki previously mounted on my scoutmaster w/jmw 9" arm and acrylic plater and it seemed to have more range with the manual vat adjustment. I imagine that the thinner plater also came into play?
Thanks
JustinM
Jr. Member
 
Posts: 20
Joined: Tue Apr 17, 2018 11:46 pm

Re: VPI Prime vta tower hight w/Kiseki Purple Heart

Postby JustinM » Mon Nov 11, 2019 12:24 pm

If anyone else is using the Kiseki Purple Heart with the VPI prime can you please share your experience with setting up this cartridge specifically where your vta ended up?
Thanks so much in advance!
Justin
JustinM
Jr. Member
 
Posts: 20
Joined: Tue Apr 17, 2018 11:46 pm

Re: VPI Prime vta tower hight w/Kiseki Purple Heart

Postby vienna acoustics » Mon Nov 11, 2019 12:30 pm

:!:
Last edited by vienna acoustics on Thu Nov 28, 2019 4:11 am, edited 2 times in total.
!
vienna acoustics
Senior Member
 
Posts: 454
Joined: Mon Apr 09, 2018 10:07 pm

Re: VPI Prime vta tower hight w/Kiseki Purple Heart

Postby tony22 » Mon Nov 11, 2019 12:56 pm

I had a PH on my Avenger with the 10" 3D arm and had no problems getting the cart level, with room to raise the tail end via the VTA tower.
Pass XP-20 & XP-17, AVA 600R, Shahinian speakers, PS Audio DMP & DS, Avenger w/mods, 12" Fatboy gimbal + 2nd mount, Benz LPS, VAS & SS carts, Ortofon Quintet Mono, Logitech Touch, Audience and PSA conditioning, PAD and AZ cables.
User avatar
tony22
Senior Member
 
Posts: 1039
Joined: Thu Nov 05, 2015 4:38 pm

Re: VPI Prime vta tower hight w/Kiseki Purple Heart

Postby Johnny » Mon Nov 11, 2019 9:18 pm

Post a picture of your tonearm with the cartridge resting on a record
Johnny
Senior Member
 
Posts: 622
Joined: Mon Sep 29, 2014 7:26 am

Re: VPI Prime vta tower hight w/Kiseki Purple Heart

Postby JustinM » Thu Nov 14, 2019 10:06 pm

Here’s a couple pictures of the bottom of the cartridge parallel to the record which appears to be at a slight angle? Also a picture of the gauge next to the tone arm which actually looks good if the 3D arms are straight and not tapered? Just wondering if it looks normal to everyone else?
Thanks
Attachments
B110070F-FBCD-433C-B3DF-7E7F38D0CBEA.jpeg
B110070F-FBCD-433C-B3DF-7E7F38D0CBEA.jpeg (1.08 MiB) Viewed 1081 times
JustinM
Jr. Member
 
Posts: 20
Joined: Tue Apr 17, 2018 11:46 pm

Re: VPI Prime vta tower hight w/Kiseki Purple Heart

Postby JustinM » Thu Nov 14, 2019 10:36 pm

Here’s the cartridge parallel to record hopefully, having a lot of trouble getting another image to post for some reason
Attachments
image.jpg
Here’s the cartridge to the record
image.jpg (1.16 MiB) Viewed 1074 times
JustinM
Jr. Member
 
Posts: 20
Joined: Tue Apr 17, 2018 11:46 pm


Return to Support Forum

Who is online

Users browsing this forum: No registered users and 18 guests

x